Step by step how to take the X60 apart

DO NOT DO THIS UNLESS THE MOTOR IS IN A UNFIXABLE CONDITION OR BROKEN

Step 1

Take the 2 housing screws, the 4 wire screws and the 3 TALON FX screws that has on it (one is between the can wires)

Step 2

Once the cover comes off you will see the TALON FX with 7 screws take them out and the talon fx will come out

Step 3

You will now reach this this has 4 screws in our case 2 of the were fine and the other 2 were striped so we had to drill in the screws, once you take them out there is something that has to be done that requieres sniping 3 wires is the wires under the soldering wich the motor will be complety screwed uness you find a way to fix it

Step 4

You will reach this point if you did everything correctly you do not have to do anything in here

Step 5

Now you will have